Table of Contents
Advertisement
This function allows you to protect access to the System Settings in System mode with a password, so all
the advanced and critical functions are not easily accessible to anyone.
To activate the protection, simply mark the check box "Password Protected" and specify the desired
password as shown in the figure. The password must be at least 5 characters long.
If you are changing a password previously defined or disabling the protection, you are asked to provide the
old password first.
Please keep a note of the configured password in a safe place. There is no way to reset the
NOTE
password protection and, in case it is lost, the unit must be returned to the factory for proper reconditioning.
When the System Settings menu is protected by a password, for each critical function you try to execute that
may compromise the proper system operation, the HMI will prompt you to enter the password. If correct, the
operation will proceed; if wrong, the operation will be aborted.
ACGM0195V1EN
300
HMWIN Studio User Manual
Advertisement
Table of Contents
