Ports & Firewalling - Panasonic HMWIN User Manual

Figure 320
HMWIN Studio shows a dialog asking for the password to match the password defined in the HMI device.
The new password will be stored into the computer OS registry to be used for further connections.
3) Using Set Target Password in update package. Password is updated by the runtime just after the update
process is completed. If the update failed (for example because Old password does not match the hmi
password) a popup informs the user about it.
You can enter the same password in HMWIN Studio using Manage Target -> Board -> Connection setting
to allow in HMWIN Studio to access runtime.
Default port used for this remote service is 2100.
A format of hmi panel reset password device side.
NOTE
For Win32 runtime, password is saved into
NOTE
Users\[username]\AppData\Roaming\Panasonic\buildNumber\server\config\RemoteUpdateConfig.xml.
Leave "Old password" empty as default if target password is not set.
NOTE
39.1 Ports & Firewalling
The table below shows all ports required by components of HMWIN Studio:
Port
80/tcp HTTP port
21/tcp FTP cmd port
2100/tcp Board port
FTP data port
16384-17407
/tcp
(passive mode)
UDP broadcast
990/udp
(Device discovery)
ACGM0195V1EN
HMWIN Studio User Manual
Remote
Usage
Access
Yes
Board Runtime/Project
Management Management
Yes
Yes
Optional
Codesys
iPLC
Yes
Yes
Yes
Optional
310