Table of Contents
Advertisement
Figure 39
When we invoke the Simulator Settings button, a dialog showing the protocols used in the project will pop-
up. Users can select to use actual or simulated protocols by using the Use Simulation checkbox.
By default the Simulator uses simulated protocols defined in the Tag Editor Simulator column for each Tag
(see Figure 40). Unchecking flag Mode, the Simulator will communicate using real protocols with devices.
Some protocols, for example the Variables protocol, does not support communication with devices
NOTE
(Win32) and, for these protocols, this option remains disabled. Usually all protocols based on ETH or RS-232
can be simulated in win32 platform or in general all protocols that do not require special hardware.
Figure 40
ACGM0195V1EN
40
HMWIN Studio User Manual
Advertisement
Table of Contents
