Log Events - Panasonic HMWIN User Manual

14.3.1 Log Events

Select the "Log" tab in the dialog box (as shown in figure). The list below this represents a set of conditions
for which you may want to store the specific event in the Alarm History Buffer. Click the check boxes
corresponding to the application requirements.
Figure 133
The Alarm Events History can be accessed by logging in a dedicated buffer called "Event Buffer"; to
configure the Event Buffer, you have to double -click on "Buffers" in the Configuration Editor (as shown in the
figure below). Here there is an Option for Selecting the storage type.
ACGM0195V1EN
136
HMWIN Studio User Manual