Table of Contents
Advertisement
Figure 24
To add a new Tag, click on the "+" icon, and select the Address from the Communication protocol address
dialog. When Tags are initially added, these Tags are named Tag1, Tag2, etc., by default. The user can
rename the Tag with the appropriate name by clicking once on the Tag name.
The Tag Editor provides a Tag Import feature, which is available based on the protocol selected. Not all
protocols support Tag Import. If the protocol does support this feature (see specific Protocol
documentation), first select the Protocol from the filter button and then click on the Import button (as shown
in the figure below).
Figure 25
You will see the dialog that corresponds to the protocol selected, which prompts you to browse for the
symbol file. The symbol file is exported from the controller programming software.
ACGM0195V1EN
27
HMWIN Studio User Manual
Advertisement
Table of Contents
