Table of Contents
Advertisement
Figure 315
Discovery service is a broadcast service. When a remote connection is done via VPN or from
NOTE
external networks discovery is not working, so, type directly IP address of target to connect to it.
When the device is recognized the Info box shows the target details as shown as an example in the figure
below.
Figure 316
In the component list locate the one you need to update, check the box and browse for the file from the
"Source file" box as shown in the figure below.
Figure 317
Then click download and check the progress from the Status box below.
In the component selection you can mark more than one check box and provide the related file to be
NOTE
downloaded. The system will then execute the transfer of the all the elements, one after the other, and at the
end you will need to cycle the power of the system.
ACGM0195V1EN
HMWIN Studio User Manual
307
Advertisement
Table of Contents
