Table of Contents
Advertisement
1) Define protocols and tags in Tag Editor. For each room and each sensor to visualize an appropriate tag is
required.
Figure 241
2) Create a tag RoomNumber to use as Index Tag, for selecting rooms. In this example could be of type
UnsignedInt using Variable protocol.
3) From ProjectView, double click on Config -> Tags -> Indexed Tag Set to open Indexed addressing
configuration page.
4) Click on "+ Add" button to create a new Indexed Tag Set.
5) Assign Indexed Tag Set name "Room"
6) Select tag to use as selector for rooms "RoomNumber"
7) Create 4 Index Instance (rooms), one for each room.
8) Create 3 Alias (variables) as table columns and rename it to "Temperature, Pressure & Humidity" using
double click on table columns
9) Double click on cells of table to select tags as shown below (or click F2 on cells for entering in edit mode)
Figure 242
Index Tag datatype can be a number, a string or any type of simple data types.
NOTE
ACGM0195V1EN
227
HMWIN Studio User Manual
Advertisement
Table of Contents
