Panasonic HMWIN User Manual page 43

Figure 42
The other option is Delete Dynamic Files. There are files that can be modified in the HMI at runtime, for
example you can create new users at runtime or you can upload new values to the recipes. If the option to
delete the files is selected, the edited configuration of the recipes, or users, or the schedulers will be deleted
and overwritten by the project configuration.
Dynamic files are not deleted using Delete Dynamic Files if storage type is external (example USB /
NOTE
SD Cards).
Please make sure to check carefully before selecting this option as some data can be lost.
IMPORTANT
Data cannot be restored after it has been deleted.
When transferring a project, the Studio uses a combination of HTTP and FTP connection. The HTTP
connection is used to issue commands to the target device like "switch to transfer mode" or "unload running
project"; the FTP session is instead used to transfer the files to the panel flash memory.
The Default port for HTTP connections on the Target is set to 80. However, the user can change the port
number to a different value. To set the port number from HMWIN Studio, click on the Run > Manage Target,
and then click on Target Setup on the dialog. The HTTP, FTP port or HTTPS, FTPS port can be set for the
target.
The Host Name can be defined by the user, in the appropriate box in the Target Port pop-up. This will allow
each panel to be easily identified on a network with multiple panels. The drop down box will no longer show
HMI@10.2.0.6, but will show, for example, Machine1@10.2.0.6.
After renaming the host, it is necessary to download the system files to the target.
ACGM0195V1EN
43
HMWIN Studio User Manual