Importing And Exporting Processes - External Memory - Frima 111 Operating Instructions Manual

Importing and exporting processes –
external memory
Importing and exporting
You can copy your cooking processes to a genuine
USB memory stick from the unit manufacturer. The
cooking programs can then be copied to a computer
or another unit.
You will need the USB memory stick from the unit
manufacturer: Article no.: 42.00.042
Exporting a program:
1
Switch the unit off and on again.
2
Insert the USB memory stick into the USB port
under the control panel.
3
4
5
The cooking processes will be stored on the USB
stick (the store process is complete when the
colour of the USB stick symbol changes from red
to blue and a tick appears).
Importing a program:
1
Switch the unit off and on again.
2
Insert the USB memory stick into the USB port
under the control panel.
3
4
5
Cooking processes are stored in the unit's
memory (the store process is complete when the
colour of the USB stick symbol changes from red
to blue and a tick appears).
6
After all the saved processes have been
imported, the unit switches off and restarts
automatically.
Existing processes are retained if the
program names are different. If the name is the
same, then the process will be replaced.
Processes produced before unit software Version
00-50-00 cannot be converted to Version 00-50-00
or higher!
- 32 -