Frima 111 Operating Instructions Manual page 16

Instructions for using the pans
Return button
Simply press the button to end the selected process
or jump to the next higher level.
Selecting a function
Examples:
press buton
A short bleep and flashing red light confirm that the
button has been pressed.
The active button is surrounded by flashing red
border.
The central dial can be used to make settings while
the button is flashing.
Confirmation of settings
This is done automatically after 4 seconds
or
Press (Push function) the central dial
or
Press any button
Central dial
You can enter your values by turning the central
dial.
push Funktion
Settings can be confirmed by pressing the central
dial.
The water inlet can be interrupted using the Push
function.
Low water
If the display lights up, check that the water valve
is open and the strainer at the water inlet (solenoid
valve) is unblocked.
Pan valve
If the pan is too hot, the pan valve is locked and
cannot be opened until it has cooled down.
Raising and lowering the pan
The pan is raised by pressing and holding the
button. This is only possible once the cover is
completely open and if necessary, the lifting bar has
been removed.
Press and hold down the Lower button to lower the
pan. A cooking mode cannot be started until the
pan is fully lowered.
- 16 -