Installation - Kemppi master 5001 Operation Instructions Manual

Do not use faulty welding cables. Isolate yourself by using dry and not worn out protective clothes.
Do not weld on wet ground. Do not place the welding cables on the power source or other electricial
equipment.
Watch the welding fumes!
Ensure that there is sufficient ventilation. Follow special safety measures when you weld metals
which contain lead, cadmium, zinc, mercury and beryllium.
Note the danger caused by special welding jobs!
Watch the fire and explosion danger when welding container type work pieces.

2. INSTALLATION

2.1. INSTALLATION
P21
R21
S21
P21 Current meter
P22 Voltage meter
P23 Display for adjustment value of MMA welding dynamics -9..0...9
R21 Ajustment of welding current
R22 Adjustment of MMA welding dynamics
S21 Selection for local/remote control/TIG/MIG
4 – MASTER 5001/0541
P22
R22
P23
© KEMPPI OY