Table of Contents
Advertisement
GETTING STARTED
PREPARING THE PHONE FOR OPERATION
Please refer to preliminary operations, page 6.
BASIC OPERATIONS
TURNING THE PHONE ON
1
Open the clamshell.
2
Press and hold the On/Off key. A beep sounds at mobile activation. When switching the
mobile on for the first time or if the phone has been incorrectly switched off
played.
3
If your SIM card is PIN protected,
Enter the PIN code and select OK.
4
If prompted, enter the date & time settings or select
1. Please refer to security codes, page 15 and to security features, page 70 for more details on your PIN and
lock codes.
2. When the phone is on and the clamshell is open the external screen is off; when the clamshell is closed the
external screen lights up except at mobile activation (both screens are on until the mobile has found the net-
work).
If an image is set as a Welcome screen and/or a melody has been set as a Welcome melody,
the mobile first requests the pin code then shows the selected image/animation and plays the
selected melody before showing the standby display (please see setting an image as a main
screen, a welcome screen or a goodbye screen from the pictures folder, page 44 and melodies,
page 45).
MAKING A CALL
The phone can make and receive calls only when it is switched on, when a valid SIM card is
inserted and when it is connected to a GSM or DCS network service.
If the keypad is locked you can receive calls but you cannot make any (see keypad lock, page 8).
To make a call:
1
Dial the phone number or select one from your phonebook (press the left arrow key from the
standby display and select one of the available names).
2
Press the Call/Send key (
Whilst in conversation an Options list (AutoDTMF, Hold, Speaker On or Speaker Off, Mute
or Unmute, End call and Record) and Sp.on (Speaker On)/Sp.off (Speaker Off, after the
speaker has been set to On) are available from the left and right softkeys.
In compliance with European regulations, you are obliged to inform your correspondent before
recording a phone conversation.
ANSWERING A CALL
When receiving a phone call (
1
Press the Call/Send key.
You can also answer a call by opening the clamshell. Please see active flip, page 65.
REJECTING A CALL
When receiving a phone call:
1
Press the Side key, press the On/Off key or Close the clamshell to reject the call (the call is
then forwarded to your mailbox).
Enter PIN
is displayed.
is displayed).
is displayed):
Getting started
7-
Exit
if the settings are correct.
may be dis-
Advertisement
Table of Contents
