Getting Started; Preparing The Phone For Operation; Basic Operations - Mitsubishi Electric M900 User Manual

GETTING STARTED

Preparing the phone for operation

Please refer to the Getting started with your M900 booklet.

Basic operations

Turning the phone On
1 Open the clamshell.
2 Press and hold the [On/Off] key. A beep sounds at mobile activation. When switching the
mobile On for the first time or if the phone has been incorrectly switched off,
played.
3 If your SIM card is PIN protected,
Enter the PIN code and select OK.
4 If prompted, enter the date & time or select
Please refer to "Security Code: PIN codes", page 8 and to "Security features", page 104 for more details on
your PIN and lock codes.
If you like to set up a Welcome screen or Welcome melody, please see "Setting a still or animated
image to standby display(for the Main screen or the External screen), as a Welcome screen or as a
Goodbye screen from the "Pictures folder" on page 71 and "Melodies" on page 72).
Making a call
The phone can make and receive calls only when it is switched on, when a valid SIM card is
inserted and when it is connected to a GSM, DCS or PCS network service.
If the keypad is locked you can receive calls but you cannot make any (see " Keypad lock" on page 14)
except emergency calls.
To make a call:
1 Open the clamshell.
2 Dial the phone number or select one from your Phone book (press the [Left] arrow key or
the Phone book key from the standby display and select a name).
3
Press the [Call/Send] key (
Whilst in conversation an Options list (Speaker On or Speaker Off, AutoDTMF, Hold, Re-
trieve, Mute or Unmute, End call and Record) and Sp.on (Speaker On)/Sp.off (Speaker Off,
after the speaker has been set to On) is available from the left and right softkeys.
You can set the conversation volume by scrolling Up and Down.
In compliance with European regulations, you are obliged to inform your correspondent before
recording a phone conversation.
Answering a call
When receiving a phone call (
1 Press the [Call/Send] key.
You can also answer a call by opening the clamshell. Please see "active flip", page 98.
When a phone call is received the caller name, number (see "Receiving caller ID", page 102),
picture (see " Storing names and telephone numbers", page 44) may be displayed if you created
a Phone book card corresponding to this caller.
Enter PIN is displayed.
Exit to leave existing information unchanged.
is displayed).
is displayed):
12- Getting started
may be dis-