Table of Contents
Advertisement
The call type and the accumulated times of outgoing and incoming calls are dis-
played.
Selecting Details displays information on calls made on your home network, on
National roaming and on International roaming.
If Line 2 is active too, 'All Calls' for Line 1 and Line 2 are displayed separately.
BALANCE INFORMATION
This service may be supplied by your service provider. It allows you to view the remaining air-
time balance on your phone line.
Please contact your service provider for more information. If your subscription allows access to
this information:
1
Press OK. Select
2
Call
timers.
Select
3
Balance
Select
4
Select
Call
or
Set
When selecting Call
,
balance information centre. If no number is stored, select Set number and enter it. Press OK
to store the number, then select Call to call the information centre number.
-
REMINDER
CALL DURATION
You can set a duration reminder to beep regularly to remind you of the time spent on your call.
The frequency can be any multiple of 1 minute (up to 59 minutes).
1
Press OK. Select
2
Call
timers.
Select
3
Select Reminder.
4
Select
On
to activate the Call timer.
5
Enter the call timer interval (e.g.: 2 = a beep sounds every 2 minutes whilst in conversation).
6
OK
Press
to validate the entry.
-
CALL TIMER
RESET
This feature allows you to reset the call timers. The 4 digit lock code is required to reset the call
timers (default lock code: '0000').
1
Press OK. Select
2
Call
timers.
Select
3
Select Reset.
4
Select Yes.
5
Enter the phone lock code and press OK.
-
CALL COSTS
MANAGEMENT
Some service providers offer an Advice of Charge (AoC) subscription service allowing you to
view the cost of the last call cost, the total calls cost and the remaining balance on your account
(once a 'credit limit' has been set ).
To display these, you must first set a currency value and enter an average cost per unit (only
calls units are displayed if the cost information is not stored).
To set a currency value per unit:
1
Press OK. Select
2
Select
Call
costs.
3
Display cost
Select
4
Select Currency. The current currency unit value is displayed.
5
Select Modify. Enter your PIN 2 code and press OK.
6
Enter the currency name (up to 3 letters). Press
7
Enter the unit cost (e.g.: 0.15 Euro per minute). And press
(
SUBSCRIPTION DEPENDENT
Calls &
Times.
information.
number.
if the balance information number is already stored, a call is sent to the
Calls &
Times.
Calls &
Times.
Calls &
Times.
type.
)
OK
to validate.
OK
to validate.
Calls & Times
31-
Advertisement
Table of Contents
