Mitsubishi Electric iMode M341i Owner's Manual page 69

CALL BARRING
This network dependent service forbids certain outgoing or incoming call types. It requires a
call barring password.
To bar a call:
1
Press OK. Select Settings.
2 Select GSM Services.
3 Call barring.
Select
4 Outgoing calls
Select
SELECT
Outgoing
All outgoing
Outgoing
Int'nal calls
Outgoing
Int'nal excl.
home
Incoming
All incoming
Incoming
Roaming
only
5 Select Activate. Enter the password and press OK.
The network then confirms the selection.
To remove call barring or check its status:
1
Press OK. Select Settings.
2 GSM Services.
Select
3 Select Call barring.
4
Scroll up or down to select the barring type to be deactivated (Cancel) or checked and follow
the instructions displayed.
CALL BARRING PASSWORD
The call barring password is used to select the call barring levels. It is supplied via your service
provider.
To change the password:
1
Press OK. Select
2 GSM Services.
Select
3 Select Call barring.
4 Change
Select
First enter the former password then enter the new password twice. A Confirmation message
is displayed.
OPERATION MODE
You can use your mobile as a modem on the GPRS network. When the modem mode is acti-
vated, you cannot send or receive a call.
1
Press OK. Select Settings.
2 Select GSM Services.
3 Operation
Select
4 Select Modem
Incoming calls:
or
MEANING
To bar all outgoing calls.
To bar all outgoing international calls.
To bar all outgoing international calls except from calls to subscribers
within your home network.
To bar all incoming calls.
To bar all incoming calls when not on the home network.
Settings.
password.
mode.
or Standard.
Settings
69-