Getting Started - Mitsubishi Electric M720 User Manual

GETTING STARTED

PREPARING THE PHONE FOR OPERATION
Please refer to "preliminary operations", page 6.
BASIC OPERATIONS
TURNING THE PHONE ON
1
Open the clamshell.
2
Press and hold the On/Off key. A tone sounds upon activation. When switching on the
mobile for the first time or if the phone was incorrectly switched off
played.
3
If your SIM card is PIN protected,
Enter the PIN code and select OK.
4 If asked enter the date & time settings or select
1. Please refer to "security codes", page 15 and to "security features", page 76 for more details on your PIN
and lock codes.
2. When the phone is on and the clamshell is opened, the external screen is turned off; when the clamshell is
closed the external screeen lights up except at mobile activation (both screens are on until the mobile has found
the network).
If an image is set as a Welcome screen and/or a melody is set as a Welcome melody, the mo-
bile first requests for the pin code then shows the selected image/animation and plays the se-
lected melody before showing the standby display (please see "setting an image as a main
screen, an external screen, a welcome or a goodbye screen from the pictures folder", page 55
and "melodies", page 55).
MAKING A CALL
The phone can make and receive calls only when it is switched on, when a valid SIM card is
inserted and when it is connected to a GSM or DCS network service.
If the keypad is locked, you can receive calls but cannot make any (see "keypad lock", page 8).
To make a call:
1
Dial the phone number or select one from your phonebook (press the left arrow key from the
standby display, select one of the available names).
2
Press on the Call/Send key (
While in conversation an Options list (AutoDTMF, Hold, Speaker On or Speaker Off, Mute
or Unmute, End call and Record) and Sp.on (Speaker On)/Sp.off (Speaker Off, after the
speaker was set to On) are available from the left and right softkeys.
ANSWERING A CALL
When receiving a phone call (
1 Press on the Call/Send key.
You can also answer a call by opening the clamshell. Please see "active flip", page 70.
REJECTING A CALL
When receiving a phone call:
1
Press on the Side key (clamshell in closed position) , press the On/Off key or Close the
clamshell to reject the call (the call is then forwarded to your mailbox).
Feature depends on your service provider and the subscribed service.
Enter PIN
is displayed.
Exit
is displayed).
is displayed):
7- Getting started
if the settings are fine.
may be dis-