Table of Contents
Advertisement
3
Select one of the stored cards.
4
Select Options.
5
Select View.
6
Scroll down to the field(s) you want to modify and amend it/them. Select
You can create a voice dialling pattern on phonebook cards. This voice dialling pattern can only
be recorded in edition mode.
Recording a Voice dialling pattern:
1
Press the left arrow key (from the standby display) to access the phonebook.
2
Scroll down to the card you want to access and select
3
Scroll down to the
Options
select
Repeat the name until it is stored (minimum = twice). Pronounce it as clearly as possible and
in a quiet environment. When the voice patterns match,
You may have to select the number, the voice dialling pattern has to be attached if several numbers are stored
on the card. Select Home number, Mobile number or Work number if you have registered several numbers on
a phonebook card.
VIEWING AND CALLING PHONEBOOK NUMBERS
There are two ways of viewing and calling entries stored in the phonebook:
Directly from the standby display:
1
Press the left arrow key to display the phonebook list.
2
To access the required name, either scroll up or down using the up and down arrows or
press a numeric key to access the different letters associated with the key. E.g: press
twice to reach the names starting with letter 'B'.
3
Press the call key or select
Via the menu:
1
Press OK. Select Phonebook.
2
Read
Select
to display the phonebook list, then scroll up and down to the required name or
press a numeric key to access the different letters associated with the key. E.g: press
to access the names starting with letter 'B'.
3
Press the call key or select
The list of phonebook entries is displayed in alphabetical order.
1. Selecting a group from the Group selection displays the names/phone numbers of the corresponding group.
This group is then displayed when next reading the Phonebook contents.
2. Selecting Options displays the following menu choice: View, Call, Add name, Delete, Copy, Move, Group
selection (to select All names, the Phone names only, the SIM names only or the groups members), Send
by... Infrared port or SMS, Send SMS to.
3. If several phone numbers are stored on a Phone name card, scroll down to the required number and select
it before activating the call.
VOICE DIALLING
You can make a call by using your voice.
To create a voice pattern:
1
.
OK
Select Phonebook.
Press
2
Voice
dialling.
Select
3
Select
New
entry. All name entries are displayed.
4
Use the up and down arrow keys to select the card you want to use and press OK.
If several phone numbers are registered on a card (e.g.
Work
number) select one by pressing OK.
5
You are then prompted to pronounce the name at least twice (pronounce it as clearly as pos-
sible).Stored
is displayed when both voice patterns match.
If the voice patterns do not match, Failed is displayed.
Repeat the whole voice registration procedure again.
Voice dialling
field and select OK. Select
Record
then
if a voice pattern is already recorded and you want to change it.
Options
then select Call.
Options
then select Call.
OK
or select
New
Stored
Home
Phonebook
35-
Save
to store the changes.
Options
then select View.
to record the voice pattern or
is displayed.
number,
Mobile number
twice
or
Advertisement
Table of Contents
