GETTING STARTED
Preparing the phone for operation
Please refer to the Getting started with your M420i booklet or to the "Preliminary operations",
page 6.
Basic operations
Turning the phone On
1
Press and hold the [On/Off] key. A beep sounds at mobile activation. When switching the
mobile On for the first time or if the phone has been incorrectly switched off
played.
2
If your SIM card is PIN protected,
Slide the screen up and enter the PIN code and select OK.
3
If prompted, enter the date & time or select
Please refer to "Security Code: PIN codes", page 10 and to "Security features", page 89 for more details on
your PIN and lock codes.
If an image is set as a Welcome screen and/or a melody has been set as a Welcome melody, the
mobile first requests the PIN code then shows the selected image/animation and plays the selected
melody before showing the standby display (please see "Setting a still or animated image as an Idle
screen as a Welcome screen or as a Goodbye screen from the Pictures folder", page 60 and "Mel-
odies", page 61).
If you set an application as an idle screen (see "Games & applications", page 62), an information screen is
displayed and proposes to display the Doja application.
Making a call
The phone can make and receive calls only when it is switched on, when a valid SIM card is
inserted and when it is connected to a GSM, DCS or PCS network service.
If the keypad is locked you can receive calls but you cannot make any (see "Keypad lock", page 16)
except emergency calls.
To make a call:
1
Slide the screen up.
2
Dial the phone number or select one from your Phone book (press the [Left arrow] key from
the standby display and select one of the available names).
3
Press the [Call/Send] key (
Whilst in conversation an Options list (Speaker On or Speaker Off, AutoDTMF, Hold, Re-
trieve, Mute or Unmute, End call and Record) and Sp.on (Speaker On)/Sp.off (Speaker Off,
after the speaker has been set to On) is available by pressing on the [Menu] (indicated by the
icon).
You can set the conversation volume by pressing the [Up arrow] and [Down arrow] keys.
In compliance with European regulations, you are obliged to inform your correspondent before
recording a phone conversation.
Answering a call
When receiving a phone call (
1
Press the [Call/Send] key.
You can also answer a call by sliding the screen up. Please see "Active slide", page 85.
When a phone call is received the caller name, number (see "Receiving caller ID", page 88),
picture/video (see "Storing names and telephone numbers", page 37) may be displayed if you
created a Phone book card corresponding to this caller.
Enter PIN
is displayed.
Exit
if the information is correct.
is displayed).
is displayed):
Getting started
15-
may be dis-