Phone Settings - Mitsubishi Electric iMode M341i Owner's Manual

Mitsubishi cell phone owner manual
Table of Contents

Advertisement

CALLING THE VOICE MAIL CENTRE TO CHECK YOUR MESSAGES
You can either:
-Dial the Voice Mail centre number directly after receiving a message:
1
From the standby display, press and hold
- or:
1
Press OK. Select Settings.
2
Voice
Mail.
Select
3
Select Call.

PHONE SETTINGS

LANGUAGE SELECTION
You can change the language on your mobile:
1
Press OK. Select Settings.
2
Phone
settings.
Select
3
Select Language.
4
Select a language from the list displayed and press
AUTO FEATURES
-
AUTO
ANSWER
This feature is only operational when the phone is connected to a headset. The phone answers
the call automatically after about 5 seconds without the need to press a key.
1
Press OK. Select Settings.
2
Select
Phone
settings.
3
Select
Auto
features.
4
Select
Auto-answer
5
Save
Select
to store your setting.
-
AUTO
RETRY
This feature allows the phone to redial a number automatically if call has failed due to an en-
gaged line or an unavailable signal from the network. The number is re-dialled 10 times maxi-
mum until connection is established.
1
Press OK. Select Settings.
2
Select
Phone
settings.
3
Select
Auto
features.
4
Select
Auto-retry
5
Save
Select
to store your setting.
When activated, Retrying and a countdown timer are displayed prior to each new attempt. An
auto-retry warning tone beeps each time a new call attempt is made.
Selecting Exit or pressing any key during the retry process cancels the operation.
-
-
/
AUTO
SWITCH
ON
OFF
This feature allows the phone to switch on or off automatically at a pre-determined time.
1
Press OK. Select Settings.
2
Phone
settings.
Select
3
Auto
features.
Select
4
Select
Auto-switch-on
5
Enter the time you want your mobile to switch on and/or to switch off and press OK.
6
Save
Select
to store your setting.
If the phone is already on at automatic switch-on time, it remains on.
When the phone is about to automatically switch, off a warning message and a countdown timer
are displayed. Selecting Exit cancels the switch off process.
and select On.
and select On.
or
Auto-switch-off
64-
.
OK
to validate.
and select
On
to activate the feature.
Settings

Advertisement

Table of Contents
loading

Table of Contents