Pc Cable; Your Responsibility; Security Codes; Disposing Of Waste Packaging - Mitsubishi Electric iMode M341i Owner's Manual

Mitsubishi cell phone owner manual
Table of Contents

Advertisement

BATTERY DISPOSAL
In compliance with European environmental protection directives, used batteries must be
returned to the place of sale, where they are collected free of charge.
Don't dispose of your batteries within household waste.

PC CABLE

The PC cable allows you to connect the GSM mobile telephone to a Personal Computer in
order to exchange data.

YOUR RESPONSIBILITY

This GSM mobile telephone is your responsibility. Please handle it with care and in respect
of local regulations. Please keep it in a safe place at all times and out of reach of children.
Become familiar with and use the security features to block unauthorised use. If your phone
and/or SIM card are lost or stolen, call your service provider immediately to prevent illegal
use.
When not in use, turn off the phone and remove the battery.

SECURITY CODES

The phone and SIM card are delivered to you pre-programmed with codes that protect the
phone and SIM card against unauthorised use. A short description of each follows. See "se-
curity features", page 70 to change your PIN and phonelock codes.
(
2
4-8
PIN AND PIN
CODES
All SIM cards have a PIN (Personal Identity Number) that protects the card against unauthor-
ised use.
Entering the wrong PIN code three times disables the SIM card and the message SIM
Blocked is then displayed
2
PUK AND PUK
CODES
Please ask your service provider for your PUK code. Use it to unblock a disabled SIM card
(see page "security features", page 70).
The PUK2 code is required to unblock the PIN2 code (see above).
CALL BARRING PASSWORD
This password is used to bar various types of calls, made or received, from the phone (see
"call barring password", page 69).
(
4
PHONELOCK CODE
DIGITS
This code is set to 0000 on delivery. You can change it. Once changed it cannot be identified
by the manufacturer over the phone. Please refer to "phone lock code", page 70 for more de-
tails.
-
I
MODE LOCK
The default i-mode lock code is 0000.
It allows you to forbid any unauthorised use of the i-mode feature (see i-mode lock page 50).
We advise you remember these codes and make yourself familiar with their purpose and op-
eration.

DISPOSING OF WASTE PACKAGING

The packaging used for this phone is made of recyclable materials and as such should be
disposed of in accordance with your national legislation on the protection of the environment.
Please take care to separate the cardboard and plastic elements and to dispose of them in
the correct manner.
)
DIGITS
Enter PUK: appears.
.
(
).
8
DIGITS
(
)
4
DIGITS
)
Introduction
15-

Advertisement

Table of Contents
loading

Table of Contents