Download  Print this page

Getting Started; Preparing The Phone For Operation; Basic Operations - Mitsubishi Electric M350 User Manual

Gsm telephone.
Hide thumbs

Advertisement

GETTING STARTED

Preparing the phone for operation

Please refer to the Getting started whith your M350 booklet.

Basic operations

Turning the phone On
1
Press and hold the On/Off key. A tone sounds at mobile activation. When switching the
mobile on for the first time or if the phone was incorrectly switched off
played.
2
If your SIM card is PIN protected,
Enter the PIN code and select OK.
3
If asked enter the date & time settings or select
Please refer to "Security codes", page 7 and to "Security features", page 76 for more details on your PIN and
lock codes.
If an image is set as a Welcome screen and/or a melody is set as a Welcome melody, the mobile
first requests for the pin code then shows the selected image/animation and plays the selected
melody before showing the standby display (please see "Setting an image as a idle screen, a wel-
come or a goodbye screen from the pictures folder", page 57 and "Melodies", page 57).
Making a call
The phone can make and receive calls only when it is switched on, when a valid SIM card is
inserted and when it is connected to a GSM or DCS network service.
If the keypad is locked you can receive calls but you cannot make any (see "Keypad lock", page 12).
To make a call:
1
Dial the phone number or select one from your phonebook (press the left arrow key from the
standby display, select one of the available names).
2
Press on the Call/Send key (
While in conversation an Options list (AutoDTMF, Hold, Speaker On or Speaker Off, Mute
or Unmute, End call and Record) and Sp.on (Speaker On)/Sp.off (Speaker Off, after the
speaker was set to On) are available from the left and right softkeys.
Answering a call
When receiving a phone call (
1
Press on the Call/Send key.
Rejecting a call
When receiving a phone call:
1
Press the On/Off key to reject the call (the call may then be forwarded to your mailbox).
Enter PIN
is displayed.
Exit
is displayed).
is displayed):
Getting started
11 -
if the settings are fine.
may be dis-

Advertisement

Table of Contents

Comments to this Manuals

Symbols: 0
Latest comments: