Getting Started; Preparing The Phone For Operation; Basic Operations - Mitsubishi Electric iMode M342i Owner's Manual

Mitsubishi cell phone owner manual
Hide thumbs Also See for iMode M342i:
Table of Contents

Advertisement

GETTING STARTED

Preparing the phone for operation

Please refer to the Getting started with your M342i booklet.

Basic operations

Turning the phone on
1
Press and hold the On/Off key. A beep sounds at mobile activation. When switching the mobile
on for the first time or if the phone has been incorrectly switched off
2
If your SIM card is PIN protected,
Enter the PIN code and select OK.
3
If prompted, enter the date & time settings or select
Please refer to "Security codes", page 7 and to "Security features", page 68 for more details on your PIN and
lock codes.
If an image is set as a Welcome screen and/or a melody has been set as a Welcome melody, the
mobile first requests the pin code then shows the selected image/animation and plays the selected
melody before showing the standby display (please see "Setting an image as an Standby display, a
Welcome screen or a Goodbye screen from the pictures folder", page 43 and "Melodies", page 44).
Making a call
The phone can make and receive calls only when it is switched on, when a valid SIM card is
inserted and when it is connected to a GSM or DCS network service.
If the keypad is locked you can receive calls but you cannot make any (see "Keypad lock", page 12).
To make a call:
1
Dial the phone number or select one from your phonebook (press the left arrow key from the
standby display and select one of the available names).
2
Press the Call/Send key (
Whilst in conversation an Options list (AutoDTMF, Hold, Speaker On or Speaker Off, Mute
or Unmute, End call and Record) and Sp.on (Speaker On)/Sp.off (Speaker Off, after the
speaker has been set to On) are available from the left and right softkeys.
In compliance with European regulations, you are obliged to inform your correspondent before
recording a phone conversation.
Answering a call
When receiving a phone call (
1
Press the Call/Send key.
Rejecting a call
When receiving a phone call:
1
Press the On/Off key to reject the call (the call is then forwarded to your mailbox).
Enter PIN
is displayed.
is displayed).
is displayed):
Getting started
11-
may be displayed.
Exit
if the settings are correct.

Advertisement

Table of Contents
loading

Table of Contents