Table of Contents
Advertisement
VOLUME ADJUSTMENTS
The ring tone, ramping, key tones, conversation and alarm tones (alarm
clock, diary alarm and low battery alarm) audio levels can all be individually
adjusted via the Settings menu:
1
Press OK. Select Settings.
2
Tones
Select
.
3
Select Volume.
4
Select Ring, Ramping, Keys,
5
Scroll up or down to adjust the settings. You can also use the numeric keys to set the
required audio level: pressing
or
7
pressing
6
OK
Press
to validate the setting.
7
Save
Select
to store your setting.
During a call you can adjust the conversation volume level by using the up and down arrow
keys.
1. If the ring tone volume level is set to 0, the
2. Setting the key tones to 0 deactivates the key tones.
RAMPING
When activated, this feature gradually increases the incoming ringtone to the maximum volume
level if the call is not answered after the first ring.
1
Press OK. Select Settings.
2
Select Tones.
3
Select Volume.
4
Select Ramping.
5
Select On.
6
Select
Save
to store your setting.
DISPLAY
MAIN SCREEN
Themes can be changed to personalise your standby display.
To select a standby background image for your Main screen:
1
Press OK. Select Settings.
2
Select Display.
3
Select
Main
screen.
4
My picture
Select
4'
My picture
If
images (see pictures, page 43). If the image is too large, a Crop screen is displayed (see
cropping, page 44).
5
Save
Select
to store your setting.
1. The Urban theme changes twice a day: a night screen is set at 7 p.m. and a day screen at 7 a.m.
2. The Meridian theme displays the origin and the secondary clocks.
3.You can also set your Main screen image from the Pictures menu (see setting an image as a main screen, a
welcome screen or a goodbye screen from the pictures folder, page 44).
Conversation
sets the volume to 2, pressing
sets the volume to the minimum value
or one of the five available background images.
Pictures
is selected, select
or Alarm.
(1
for speech and
icon is displayed on the standby screen.
(left softkey) and select one of the available
Settings
61-
or
sets the volume to
0
for all others).
6
Advertisement
Table of Contents
