Getting Started; Preparing The Phone For Operation; Basic Operations - Mitsubishi Electric M330 User Manual

Getting Started

Preparing the phone for
operation
Please refer to the 'Getting started with
your M330' booklet.

Basic Operations

Turning the phone on
1
Press and hold
sounds at mobile activation.
When switching the mobile on
for the first time
displayed.
Enter the date & time settings
or select Exit
are fine.
2
If your SIM card is PIN pro-
tected, Enter PIN is displayed.
Enter the PIN code and select
OK
4
1. Please also see your 'Getting Started with your
M330' booklet.
2. Please refer to Security codes, page7 and to Secu-
rity features, page47 for more details on the PIN
code.
Making a call
The phone can make and receive
calls only when it is switched on,
when a valid SIM card is inserted
and when it is connected to a
GSM network service.
If the keypad is locked you can re-
ceive calls but you cannot make
any calls
page11).
To make a call:
Dial the phone number or
1
select one from your phone-
book (Press on the
select one of the available
names).
10
. A tone
may be
if the settings
.
(see Keypad
2
Press on the
Ending a call:
2
Press on the
Answering a call
When receiving a phone call (
is displayed):
Press on the
Holding your phone
How to hold
the phone
Avoid
covering the
upper back
half of the phone
so as to allow
maximum emission
lock,
and reception quality.
Please be warned that you should not, when using
the hands free mode, put the phone to your ear.
The standby display
key,
When switched on the mobile
searches connection with the net-
work. When the connection is es-
tablished a tone sounds and the
key
key
key.