Cab-1 Remote Controller Numeric Keypad Commands - Lionel Big Boy Owner's Manual

TrainMaster Command Control operations

CAB-1 Remote Controller numeric keypad commands

W
hen you press the AUX1 button on your CAB-1 Remote Controller, you
turn the numeric keypad into ten command buttons. These commands
are specific to your locomotive, and an overlay is included to help you learn these
functions. After you press the AUX1 button, you will be able to press any numbered
button until you address a different product. The corresponding RailSounds
sound system effects are in bold italic type.
Stops and resets the locomotive. Resets the locomotive's direction to forward. Resets the
RailSounds sound system to Automatic Chuff Mode. Air release sound.
Sound volume increases. Use the volume control knob located under the hatch on top of
the tender to adjust the minimum volume of all effects.
CrewTalk dialog commences
Starts the RailSounds sound system if the locomotive was previously shutdown. Triggers the water
pump sounds. Steam effects.
Sound volume decreases. Use the volume control knob located under the hatches on top
of the tender to adjust the maximum volume of all effects.
Dialog and shutdown sequence.
Activates Manual Chuff Mode (see pages 20-21) to set the chuff intensity manually.
TowerCom announcement.
Turns off the smoke unit. Let-off sound.
Turns on the smoke unit if the smoke unit switch is in the ON position. Be sure to add smoke
fluid before turning on the smoke unit to prevent damage to your locomotive. Let-off sound.
Note!
AUX1, 8 and 9 function only if the locomotive's smoke unit switch is in the ON position.
See the Lionel web site for more information.
Note!
1
AUX1