Cab-1 Remote Controller Numeric Keypad Commands For Your Locomotive - Lionel ALCo S-2 Owner's Manual

TrainMaster Command operations
CAB-1 Remote Controller numeric keypad commands for your
locomotive
W hen you press AUX1 on your CAB-1 Remote Controller, you
turn the numeric keypad into ten command buttons. The
keypad lets you control extra command features (until you press any
top-row button like SW, ACC, RTE, TR, or ENG). The CAB-1
Remote Controller keypad overlay included with this locomotive will
help you learn the extra commands specific to ths unit.
RailSounds sound system effects are in bold italic.
0 Stops and resets the locomotive. Resets
the locomotive's direction to
FORWARD. Resets the RailSounds
sound system to automatic RPM
operation. Horn blows. RPMs
return to automatic.
1 Raises the volume of the RailSounds
sound system. Sound volume
increases.
2 CrewTalk communication is the
sound of unintelligible walkie-talkie
communication.
3 Raises the RailSounds sound system
RPMs level. Starts up the RailSounds
sound system. RPMs increase.
Start-up sequence commences.
4 Lowers the volume of the RailSounds
sound system. Sound volume
decreases.
5 Activates the RailSounds sound system
shutdown sequence. Just like the real
thing, your locomotive's RPMs must
be at idle for shutdown to occur. Press
6 repeatedly to lower the RPMs until
they won't descend further. Your
locomotive is now at idle. Press 5 to
initiate the shutdown sequence and
listen for the CrewTalk communication
Note!
AUX1, 8 and 9 work only if the smoke unit switch is in the ON position.
sound. CrewTalk communication
sounds, Diesel shutdown
commences. Remember, the horn,
bell, and RPMs will not sound until you
restart the RailSounds sound system by
pressing 3.
6 Lowers the RailSounds sound system
RPM level. RPMs decrease.
7 TowerCom announcements are an
audible two-part announcement that
include the locomotive's road number
and/or name. Pressing AUX1, 7
triggers a "hold for clearance"
announcement. Press 7 again (without
pressing AUX1), and a "clear for
departure" message plays. There is a
four second delay in this function.
8
Turns smoke off. Air-release
sounds.
9
Turns on the smoke generator. Press
and hold 9 (ten seconds maximum) to
initiate Smoke Boost— this super-
heats the smoke generator and
enhances the smoke output when you
start running your locomotive. See
note on filling or turning off the smoke
generator on page 17.
Air-release sounds.
12
START-UP
CREW
TALK
VOLUME RPM
SHUT
DOWN
SMOKE
TOWER
OFF ON
COM
ENGINE
RESET
DIESEL
S