Table of Contents
Advertisement
TrainMaster Command Control operations
CAB-1 Remote Controller numeric keypad commands
W
hen you press the AUX1 button on your CAB-1 Remote Controller, you turn the numeric
keypad into ten command buttons. After you press the AUX1 button, you will be able
to press any numbered button until you address a different product. The corresponding
RailSounds sound system effects are in italic type.
Stops and resets the locomotive. Resets the locomotive's direction to forward.
Raises the volume of the background sounds by tapping AUX1 and then this key. Volume
settings are retained when track power is turned off. Sound volume increases.
Engineer begins radio dialog, dispatcher replies (see page 18). CrewTalk communication.
Enters manual RPM mode and increases the RailSounds sound system RPM level. If the
LEGACY RailSounds sound system is shut down (see 5 key below), AUX1, 3 activates a full
LEGACY RailSounds sound system start-up while the locomotive is stopped after pressing
AUX1, 5 with track power on.
Lowers the volume of the background sounds by tapping AUX1 and then this key. Volume
settings are retained when track power is turned off. Sound volume decreases.
Activates the LEGACY RailSounds sound system shutdown sequence when stopped. Activates
the emergency stop feature while in motion. Note that, in the shutdown sequence, the
smoke unit will turn off if it was already on.
20
Advertisement
Table of Contents
