Assigning Your Locomotive A New Id - Lionel Big Boy Owner's Manual

TrainMaster Command Control operations

Assigning your locomotive a new ID#

A
s your roster of TrainMaster Command Control-equipped locomotives grows, you
will want to give each unit a unique ID#. The locomotive will respond to commands
associated with its ID# while all other units will disregard these commands.
Note!
To restore your locomotive's functions, see page 23.
1. Slide the Command reverse unit switch on your locomotive to the PROG position.
2. Place the locomotive and tender on the track.
3. Connect the Command Base and plug it in.
4. Power up the track.
5. Press ENG.
6. Enter the unique ID#. Choose any number from 1 to 99 that has not been assigned to
another locomotive (ENG). We recommend using a part of your locomotive's cab number.
7. Press SET. The locomotive's whistle will sound, or the headlights will flash if the
RailSounds sound system is off.
8. Slide the Command reverse unit switch back to the RUN position.
The locomotive's ID# has been set. Be sure to record the new ID# for your reference.
22