Trainmaster Command Control Operations; Cab-1 Remote Controller Commands; Cab-1 Remote Controller Numeric Keypad Commands - Lionel Rocket Launcher Owner's Manual

TrainMaster Command Control operations

CAB-1/CAB-1L Remote Controller commands
T
he CAB-1 Remote Controller commands are detailed below. The corresponding RailSounds
sound system effects are in bold italic type.
Immediately launches the rocket.
Activates the Short (T-Minus 15) launch sequence.
Short press (CAB-1 only) - Activates numeric keypad.
Long press > 3 seconds - Activates Long launch
sequence.
Toggles all lights on/off, except lights that are wired to
track power.
Clockwise - moves gantry forward (closer to launch
pad)
Counter-clockwise - moves gantry backwards (away
from launch pad).
Activates the warning siren.
Toggles the klaxon sound on and off.
Stops the gantry, if it was moving
Not used.
Not used.
Aborts launch, if active. Stops gantry, if moving.

CAB-1 Remote Controller numeric keypad commands

W
hen you press the AUX1 button on your CAB-1 Remote Controller, you turn the numeric
keypad into ten command buttons. After you press the AUX1 button, you will be able to
press any numbered button until you address a different product.
Note!
The Cab1-L does not require Aux1 to enable the numeric keys.
Reset (aborts launch, stops gantry movement, toggles background chatter). Wakes the
Rocket Launcher from a shutdown state.
14