The Output Terminal Assignment Settings; Screen Specifications; Display Language; Screen List/Transition - Mitsubishi FR-A800 Series Manual

4.2 The Output Terminal Assignment Settings

In this sample, the functions are assigned to the output terminals and the output signals are displayed on the GOT
screen.The output terminals and the assigned functions are listed in the following table.
Item
Output Terminal RUN
Output Terminal SU
Output Terminal IPF
Output Terminal OL
Output Terminal FU
Output Terminal ABC1
Output Terminal ABC2

5. SCREEN SPECIFICATIONS

5.1 Display Language

The language of the text displayed on the screen can be switched between Japanese, English, and Chinese
(Simplified). The texts in three languages are registered in the columns No.1 to No.3 respectively in the comment
group No. 300 to No.340 as well as No.500 as shown below. When the column No. is stored in the language
switching device, the text in the language corresponding to the column No. will be displayed.
Column No.
1
2
3

5.2 Screen list/transition

5.2.1 Screen list/transition (common)
Window screen W-30003: Clock Setting
Base screen B-12000:
Menu and other base screens
Parameter
Pr.190
Pr.191
Pr.192
Pr.193
Pr.194
Pr.195
Pr.196
Language
English
Japanese
Chinese (Simplified)
System Alarm
Set Value
211 Upper Limit Warning Detection
1
2 Instantaneous Power Failure/Undervoltage
3
4
99
212 Lower Limit Warning Detection
Key Window
Window screen W-30002: Language
Setting
Window screen W-30001: Alarm Reset
8/83
Function
Up to Frequency
Overload Warning
Output Frequency Detection
Fault
Window screen W-14900:
Out of Input Range Dialog
BCN-P5999-1045-1a