Extech Instruments DCP60 User Manual page 21

Input Command:
GOCP[CR]
Return value:
<current>[CR]
OK[CR]
Input Command:
SOCP<current>[CR]
Return value:
OK[CR]
Input Command:
PROM<voltage0><current0>
<voltage1><current1>
<voltage2><current2>[CR]
Return value:
OK[CR]
Input Command:
GETM[CR]
Return value:
<voltage0><current0>[CR]
<voltage1><current1>[CR]
<voltage2><current2>[CR]
OK[CR]
Input Command:
RUNM<memory>[CR]
Return value:
OK[CR]
Get preset upper limit of output Current
<current>=???
Preset upper limit of output Current
<current>=000<???<Max‐Curr
*Max‐Curr value refer to product
specification
Save Voltage and Current value into 3 PS
memory locations
<voltageX>=???
<currentX>=???
(X is memory location number start from 0
to 2)
Get saved Voltage and Current value from 3
PS memory loctions
<voltageX>=???
<currentX>=???
(X is memory location number start from 0
to 2)
Set Voltage and Current using values saved
in memory locations
<memory>=0/1/2
21
Input command:
GOCP[CR]
Return value:
111[CR]
OK[CR]
Meaning:
The preset upper limit of output Current
is 11.1A
Input command:
SOCP151[CR]
Return value:
OK[CR]
Meaning:
Preset upper limit of output Current as
15.1A
Input command:
PROM111111022122033133[CR]
Return value:
OK[CR]
Meaning:
Preset Memory 0 as 11.1V and 11.1A
Preset Memory 1 as 2.2V and 12.2A
Preset Memory 2 as 3.3V and 13.3A
Input command:
GETM[CR]
Return value:
111111[CR]
122122[CR]
133133[CR]
OK[CR]
Meaning:
PS return following preset value from
memory locations;
Memory 0 is 11.1V and 11.1A
Memory 1 is 12.2V and 12.2A
Memory 2 is 13.3V and 13.3A
Input command:
RUNM1[CR]
Return value:
OK[CR]
Meaning:
Set Voltage and Current using values
saved in memory location 1
DCP60‐EU‐DE v1.4 9/13