Eurocopter AS 350 83 Flight Manual page 339

COMPLEMENTARY FLIGHT MANLJAL" .
4 OPERATING PROCEDURE
4.1 Automatic Ooeration 8
The transmitter is actuated automatically in the event of an impact,
assuming the switch is set to "ARM".
~ : In order to reset the locator beacon following automatic
actuation, proceed as follows:
-Select the remote control switch "ON" for two seconds, or
the transmitter selector to "OFF".
-Re-select the switch to "ARM".
4.2 Manual ODeration
The unit may be actuated manually by setting the switch to "ON".
4.3 Portable ODeration 8
The transmitter may be used on the ground as follows:
-Remove the transmitter from its mount.
-Select an unobstructed area.
-Extend the antenna.
-Place the unit upright with the antenna on top.
-Switch on the transmitter by setting the "ON-OFF-ARM" switch to "ON".
8
8
N
350 83 9.2
02-03 Page 6