Eurocopter AS 350 83 Flight Manual page 279

COMPLEMENTARY FLIGHT MANUAL
.5 OPERATION
The VEMD is switched on when the "BAT" switch is set to "ON",
The equipment perfonns an initialization test which checks correct
operation of each of the two lines. During the test, the following message
is displayed:
"",-] "TEST IN PROGRESS" 'J
If the test is faulty, the following is displayed:
8: "LANE 1 FAILED" ~ "LANE 2 FAILED"
-"PRESS OFFl" ., "PRESS OFF2"
The line concerned can be cut by pressing the associated push-button
(OFFl or OFF2) , This validates the initialization tests and switches the
remaining line to operating mode,
If the test is correct, the VEMD automatically goes to operating mode.
6 FLIGHT MODE
The flight mode is displayed by default, when no other mode is selected.
The "SCROLL" push-button issued to scroll the pages as shown on the
following diagrams(Figures 2 and 3).
.
.
350 B3 7" 13
97-40 Page 3