Menu Flow Chart - Minolta PS7000 Operator's Manual

Menu flow chart

Pressing the keys on the control panel displays the corresponding menus as shown below.
User Mode Save Data
Up to three programs of
customized settings can be
registered.
Book Sheet
Select Book mode when
scanning the thick original
(book), and Sheet mode when
scanning a single-page
document.
Cent Eras
The shadow generated in the
center of the open book is
masked. [Auto Set] can be
selected in Book mode to
detect the center of the
original. The center of the
original is regarded as the
center of the book table when
[Cent Set] is selected. The
shadow masking width can be
set from 2.5 to 20 mm (in 2.5
mm increments).
Output
Select an external device
(printer or personal computer)
to be connected to the
Scanner.
Previous
* Select [OK] to return to the main menu.
Job Recall
NO.1
NO.2
Recalls the customized
settings previously
NO.3
registered using [Program].
Previous
Mode Check
Displays the current settings
for the Scanner.
Previous
NO.1
NO.2
NO.3
Confirm
Previous
OK
OK
Book mode
Sheet mode
(In Book mode: Set the original distance.)
(In Sheet mode: Set the original height.)
OK
(Available only in Book mode)
Auto set
Cent set
-2.5 mm Wide
+2.5 mm Wide
OK
PC
Printer
OK
5-16