Print Functions; Printing A Project - Akai DD1500 User Manual

24 - PRINTER FUNCTIONS

PRINT FUNCTIONS

It is possible to make hard copy of things like your disk directory, libraries and projects.

PRINTING A PROJECT

PRINT is found on F1 of the main edit screen and this is used to print out the contents of
a project. Pressing PRINT will show this screen:
The parameters are:
STYLE
CUE DETAIL
DISK DETAIL
PRINT TRACKS
Assuming everything is connected properly and the printer is switched on and on-line, you
will see a highlighting progress display moving across the bottom of the LCD. If you wish
to cancel printing, press EXIT.
NOTE: The highlighting actually shows the printer data being spooled off to the printer's
memory, not the actual printer progress. In other words, even though the highlighting has
stopped, the printer will continue to print out the remaining contents of its memory. Also,
please note that for very short printouts, the highlighting may be so fast, you won't notice
it and then printer will start printing.
If there is a problem, you will receive an error message (these are listed later).
Page 268
Allows you to select that the project will be printed out as a
Qlist or as an EDL.
You may select whether the cues' level and/or fade
information will be included in the printout.
You may select whether the cues' disk SCSI ID, disk label
or disk name will be included in the printout.
Here you may select which tracks will be included in the
printout. The default is ALL TRACKS (all tracks will be
included) but you may also select PLAY KEYS and you
may select which tracks you want included using the track
PLAY select keys.
Version 2.00 - November, 1994