14 - EDITING
SLIPPING POST
As with PRE, you may also trim the POST cue and slip it in time. To do this, press the
SLIP key. You will receive the following screen:
The top line of the screen shows SLIP CUE POST, the POST block's padlock symbol is
shown as 'unlocked' and the SLIP key is highlighted.
You can use the jog wheel to trim the cue's start point and slip it in time. I.e.:
If the cue overlaps another cue when you slip it, when the overlap limit is reached, you will
receive the prompt:
Slipping a cue in this way is similar to using NUDGE except that you may only slip it
between two cues with a small overlap (NUDGE allows you to move a cue over another,
effectively 'pasting' over it).
Page 130
Version 2.00 - March, 1996