Deleting Tempo Map Steps; Locating To Steps - Akai DD1500 User Manual

22 - SYSTEM - MIDI
You will note that as you add steps to the tempo map, once you exceed four steps, two
up and down arrows will appear to indicate that there are steps 'above' and 'below' the
screen:
Use the cursor UP/DOWN keys to scroll through your tempo map.

DELETING TEMPO MAP STEPS

If you make a mistake or wish to delete any steps in the map, move the cursor to the step
you wish to erase and press F6 - DELETE. As a precaution against accidentally deleting
steps, you will receive this prompt:
Press EXECUTE to delete the selected step or EXIT to abort.

LOCATING TO STEPS

You may use LOCATE - F4 - to go directly to steps in the tempo map. Simply move the
cursor to the step you wish to locate to and press LOCATE followed by EXECUTE (EXIT to
abort, of course).
Once you have constructed a tempo map, save it by saving the project using the SAVE
key in the usual way.
Page 230 Version 2.00 - December, 1994