Table of Contents
Advertisement
SUMMARY
To complete the auto conform process:
PRESS SYSTEM
•
Make sure that SYSTEM parameters such as sampling frequency, EXT. TIME
SOURCE, wordsync, etc., are all correctly set. Failure to do so will result in errors in the
auto conform process or even a complete failure.
PRESS LOAD
•
Either create a new empty project to import the EDL into or select and load an existing
project you want to import the EDL into.
•
In the EDL SETUP pages, make sure the EDL tracks are correctly mapped to the
DD1500 tracks.
•
Select the appropriate tracks for editing.
•
Import the EDL from the floppy disk in the LOAD - IMPORT EDL pages.
PRESS REC/#
•
Check the ROUTE INPUTS page to make sure that the audio inputs, digital or
analogue, are routed to the correct tracks on the DD1500.
•
Press AUTO CONFORM - set parameters such as RECORD HANDLES, etc., as
appropriate if necessary.
•
Press EXECUTE to proceed, EXIT to abort.
•
At any time, you may abort the auto conform by pressing EXIT.
Version 2.00 - March, 1996
UTILITIES - RS422 - AUTO CONFORM - 18
Page 179
Hide quick links:
Advertisement
Table of Contents
