Slipping Pre - Akai DD1500 User Manual

14 - EDITING

SLIPPING PRE

It is also possible to physically move or slip the cue when using TRIM. You will have
noticed the two soft keys SLIP and TRIM on F1 and F2. The default selection is TRIM but
you may also select SLIP. Pressing SLIP will show this screen:
The top line of the screen shows that you are slipping the PRE cue, the 'padlock' in the
PRE block 'opens' indicating the cue is unlocked and the SLIP key is highlighted to show
that SLIP is selected. As you move the jog wheel or use the DATA ENTRY +/- or numeric
keypad -/< or +/> keys, the cue's end time will be trimmed and the whole cue will slip
backwards or forwards. I.e.:
This is not dissimilar to NUDGE AUDIO in many ways. The most notable exception is that
when the cue being slipped overlaps the next or previous cue and the overlap limit is
reached - i.e.:
you will get the prompt:
When using NUDGE AUDIO, this wouldn't happen and the cue would effectively be
pasted over the next or previous cue.
Page 126
OVERLAP
Version 2.00 - March, 1996