Table of Contents
Advertisement
SPECIFICATION
Voltage Input :
Station Dimensions:
Weight:
Power Consumption:
Temperature Range:
Heating Element
Output voltage:
FUNCTIONS and FEATURES
•
Microprocessor-controlled ESD safe Soldering station.
•
Composite tip design.
•
Compatible with Lead free applications.
•
High power heating element for fast heat recovery.
•
Large display with digital controls.
•
Auto sleep and wake up function.
Digital offset.
•
•
Programmable sleep timer.
•
System-lock out feature.
•
Quick jump to favorite settings.
•
Switch between Centigrade and Fahrenheit scale.
CONTROL PANEL GUIDE
2
Increase/
decrease buttons
3
Main power
switch
6 6 6 6
available in 110V / 220V
110(w) x98 (h) x 155 (d) mm
1.5Kg
70W
200°C - 480°C
Ceramic heater
24V
1
Main
Display
4
Set Button
5
Solder iron
connector
OPERATING GUIDELINES
3. "t000" indicates that the sleep function is currently turned off. To
adjust the timer settings press the increase or decrease button.
Sleep timer is adjustable from 2 to 60 minutes.
4. To save the settings, repeatedly press the SET button until the
display shows the word "SAVE". Press the decrease button to save
and exit from the system configuration mode.
F. SYSTEM LOCK
The System lock feature disables adjustment to both temperature
and system configuration. The display will show " SAFE" when system
lock feature is enabled. To disengage system lock press and hold all
three buttons for more than ten seconds.
To activate the system lock feature:
1. With the unit turned On, press and hold the SET button.
2. Wait for the display to change to "A###", then repeatedly press the
"SET" button until "L0FF" is displayed. This denotes that we are
now configuring the system lock setting.
3. "L0FF" indicates that the system lock function is currently disabled.
To engage the system lock press the decrease button to switch the
lock feature to "LOn".
4. To save and activate the system lock settings, repeatedly press the
SET button until the display shows the word "SAVE". Press the
idecrease button to save and exit from the system configuration
mode.
5. The display would show the word " SAFE", indicating system lock is
enabled.
When the system lock feature is enabled changing of temperature
and system settings are blocked. The system lock must be disengaged
to re-enable access to the system.
11
11
11
11
Advertisement
Table of Contents
