Download Print this page
aoyue SP2000+ Instruction Manual

aoyue SP2000+ Instruction Manual

Environment friendly solder pot

Advertisement

Quick Links

This appliance can be used by children aged from 8 years and above and persons
with reduced physical, sensory or mental capabilities or lack of experience and
knowledge if they have been given supervision or instruction concerning use of
the appliance in a safe way and understand the hazards involved. Children shall
not play with the appliance. Cleaning and user maintenance shall not be made by
children without supervision.
The specific instructions related to the safe operation of this appliance (as given
in 7.12 of this standard) shall be collated together in the front section of the user
instructions.
The height of the characters, measured on the capital letters, shall be at least 3
mm.
These instructions shall also available in an alternative format, e.g. on a website.
A fire may result if the appliance is not used with care, therefore:
be careful when using the appliance in places where there are combustible
materials ;
do not apply to the same place for a long time;
do not use in presence of an explosive atmosphere;
be aware that heat may be conducted to combustible materials that are out
of sight;
place the appliance on its stand after use and allow it to cool down before
storage;
do not leave the appliance unattended when it is switched on.
Rohs
Correct Disposal of this product
This marking indicates that this product should not be disposed
with other household wastes throughout the EU. To prevent
possible harm to the environment or human health from
uncontrolled waste disposal, recycle it responsibly to promote
the sustainable reuse of material resources. To return your used
device, please use the return and collection systems or contact
the retailer where the product was purchased. They can take
this product for environmental safe recycling.
Manufacturer:
AOYUE International Limited
Jishui Industrial Zone, Nantou, Zhongshan City,
Guangdong Province, P.R.China
http://www.aoyue.com
AOYUE
SP2000+
Environment Friendly
Solder Pot
INSTRUCTION MANUAL
Thank you for purchasing Aoyue SP2000+ Solder Pot system.
It is important to read the manual before using the equipment.
Please keep manual in accessible place for future reference.
®
®

Advertisement

loading
Need help?

Need help?

Do you have a question about the SP2000+ and is the answer not in the manual?

Questions and answers

Summary of Contents for aoyue SP2000+

  • Page 1 Correct Disposal of this product This marking indicates that this product should not be disposed Thank you for purchasing Aoyue SP2000+ Solder Pot system. with other household wastes throughout the EU. To prevent It is important to read the manual before using the equipment.
  • Page 2 BASIC TROUBLESHOOTING GUIDE This manual is designed to familiarize and instruct the operator with the proper usage and maintenance of the PROBLEM 1: THE UNIT HAS NO POWER equipment. The “Care and Safety Precautions” section Check if the unit is switched ON. Power switch located at the back. explains the hazards of using any type of soldering or Check the fuse.
  • Page 3: Product Description

    DIGITAL CALIBRATION PRODUCT DESCRIPTION Digital Temperature Calibration Example 1 The Aoyue SP2000+ solder pot is a highly durable general The external temperature sensor displays 250 degrees. ● purpose industrial solder specially made lead-free The set temperature and displayed actual temperature of the is 300 ●...
  • Page 4 SPECIFICATION DIGITAL CALIBRATION D. Utilizing Digital Temperature Calibration MAIN STATION By default, the system is properly calibrated but for some cases when a little adjustment of the solder pot temperature is required the following Power Input : available in 110V / 220V procedure can be done.
  • Page 5: Safety Precautions

    OPERATING GUIDELINES SAFETY PRECAUTIONS Put in Solder bars to melt. Once solder has melted ensure that CAUTION: Improper usage can cause serious injury to personnel the external sensor is able to come in contact with the melted and/or damage to equipment. For your own safety, please observe the ff.
  • Page 6 CONTROL PANEL GUIDE OPERATING GUIDELINES IMPORTANT REMINDERS: 1. Make sure the equipment is placed on a flat stable surface. 2. Ensure all terminal connections are properly secured. IMPORTANT: Please refer to the CONTROL PANEL GUIDE page for buttons and display panel directory. A.