Table of Contents
Advertisement
Item
card
Access Your Camera
Before you begin, check that:
Your camera is operating properly and connected to the network.
The PC client you are using is installed with Internet Explorer 7.0 or
later. IE 8.0 is recommended.
Follow these steps to access your camera through the Web interface:
1.
Open your browser, input the IP address of your camera (default IP
is 192.168.0.13) in the address bar and then press Enter to open
the login page.
2.
Enter the username (default is "admin") and password (default is
"123456") and then click Login.
NOTE!
Install the ActiveX at your first login. For the detailed steps, see
the
ActiveX. When the installation of the ActiveX is completed, open
your IE to log in.
Install the ActiveX
The following takes the IE browser as an example to describe the
installation steps.
1.
Click Download.
2.
Click Run. You may also click Save to download the file to your
computer first.
recommended.
43
Requirements
Install
Advertisement
Table of Contents
