CAUTION!
When mounting the camera, please install the bracket adapter to
the bracket first and then mount the camera to the bracket.
Seal the connector between the dome camera and the pole for
waterproofing. Ensure that the sun shield on the tail cable unit is
mounted in position.
The following section describes concealed installation. To implement
open installation, directly lead the cable out of the leading-out hole
on the flank of the bracket.
Corner Mount
1.
Mark positions of holes by referring to mount points of the bracket.
2.
Drill holes on the wall.
Select a drill bit matching the outer diameter of the expansion bolt.
For the hole depth, refer to the bolt length.
28