Cable Connection - UNIVIEW IPC640 Series Quick Manual

Figure 1-3 Front View of an Infrared/Laser PTZ Dome
G1 ½ thread
218mm(8.6")

Cable Connection

All cables are tagged to indicate their functions. This section uses one
model as an example. Connect cables by referring to
NOTE!
Certain models support optical interface (SFP module) and FC fiber

connector (fiber optical adapter included).
The dome camera is delivered without the SFP optical module

installed. For the details about mounting the optical module, see
Mount the SFP Optical Module (For Certain
Please disconnect the power before mounting. You can connect the

camera to the network through the optical interface or the copper
interface after mounting and switch two interfaces without
disconnecting the power. The two interfaces cannot be used at the
same time.
For the detailed information about the specifications, see the

datasheet.
Models).
2
Table 1-1.