10. Fasten the bracket to the four expansion bolts, and lock the
bracket by using flat washers, spring washers, and nuts.
Pendant Mount
NOTE!
The pendant mount bracket is for indoor installation only. For
specially required outdoor installation, please make sure all
waterproof requirements are met. We will not assume any
responsibility for damage or loss incurred otherwise.
Any custom made pendant must conform to the waterproof
requirements.
Tail cables should be protected by waterproof measurements and
not be exposed. The whole wiring area of tail cables should be well
waterproofed. Seal the connector of the dome camera and the
pendant for waterproofing. Ensure that the sun shield on the tail
cable unit is mounted in position.
When mounting the camera, please first install the bracket adapter
to the bracket and then mount the tail cable unit to the adapter.
23