Waterproof Components For An Rj45 Plug; Access Your Camera - UNIVIEW IPB5E40X Quick Manual

installation is adopted, cables are not penetrated into
the wall but threaded out from the outlet on one side
of the base.

Waterproof Components for an RJ45 Plug

3
Seal ring
Insert in order
You can crimp the inner wires of the cable with the
RJ45 plug first and then cover the waterproof
components. You may also cover the waterproof
components first.

Access Your Camera

Before you begin, check that:
Your camera is operating properly and connected to the

network.
The PC you are using is installed with Internet Explorer

7.0 or later.
Follow these steps to access your camera through the Web:
1. Open your browser, input the IP address of your camera in
the address bar and then press Enter to open the login
page.
Attach the seal ring to the
1
2
Ethernet interface. Mount the
waterproof components in order.
Then insert the cable into the
Ethernet interface and screw the
waterproof bolt in.
9