Wall Mount - UNIVIEW IPC640 Series Quick Manual

3. Connect the optical fiber plug and the optical module.

Wall Mount

Fast mount and conventional mount are basically the same. The
difference lies in operations after Step 5. Fast mount avoids weight
lifting and allows one to finish the mounting job.
This section describes both fast mount and conventional mount for wall
mount. For other mount modes, only fast mount is described.
CAUTION!
When mounting the camera, please install the bracket adapter to

the bracket first and then mount the camera to the bracket.
Pay attention to the three stainless screws that connect the tail

cable unit and the camera. Verify that they are tightened so that the
camera is entirely sealed. Ensure that the sun shield on the tail
cable unit is mounted in position.
Fasten the screws of various joints connecting to the dome camera,

such as the bracket and the adapter ring, and ensure that no screws
are missing.
For waterproofing, apply sealant between the dome and the

bracket, wall veneer slits, and leading-out holes of the wall.
The following section describes concealed installation. To implement

open installation, directly lead the cable out of the leading-out hole
on the flank of the bracket.
15