Table of Contents
Advertisement
4.
Screw-in the bracket adapter (G1 ½ male thread) to the connector
of the wall mount bracket.
5.
Tighten the screws (M4) at the bracket.
6.
Attach the tail cable unit to the hook with the camera perfectly
aligned with the three positioning pilot pillars, push the dome
camera in place, and then secure the three stainless screws.
Stainless screws (3)
Hook
Positioning pilot pillars (3)
Dome camera
21
Advertisement
Table of Contents
Need help?
Do you have a question about the IPC640 Series and is the answer not in the manual?