Distance
(Unit: m)
Power (Unit: W)
90
100
Table 2-2 Phoenix Terminal for the Power Cable
Power Supply
24 VAC 3A
24 VDC 2.5A
Process Map
Make sure the camera is disconnected from the power during
installation.
NOTE!
Accessories such as the wall mount bracket and the pendant mount
bracket may be necessary during mounting. For supported models,
refer to the recommended list provided by your dealer.
The wall bearing capacity and the bracket length must satisfy
mounting requirements. Select a proper mount mode according to
the actual situations.
Core Diameter
(Unit: mm)
-
-
+ / –: The anode and the cathode are not distinguished
for the red and black cables.
GND: yellow-green, used to ground the camera.
Note:
Ensure that the terminal is connected to a reliable
grounding point.
0.80
1.00
-
-
Cable Color
10
1.25
2.00
24
61
21
55