The flash program is programmed in the first start,
prolonging the self‐test duration. Please wait patiently.
When you restart the device, the self‐test will be quick.
When the working environment temperature is lower
than zero Celsius degrees, the device will be
automatically pre‐heated. When the temperature rises
above zero Celsius degrees, the device will start the
self‐test again. It takes a rather long time (at most 30
minutes) for the device to finish the pre‐heating
process. Please wait patiently.
5
Setting the Camera over the LAN
To view and configure the camera via LAN (Local Area
Network), you need to connect the network camera in the same
subnet with that of your PC. Then, install the EZStation software
to search and change the IP address of network camera.
21